When you try to make a virtual server by switching from SCO OpenServer Smart Array controller system to ESX server, you may encounter certain problems. After setting your drives on the new system and restoring the data, when you attempt to boot your system, the process might fail. This behavior may make all your critical data inaccessible and cause serious data loss. To sort out such behavior of SCO OpenServer system, you should opt for SCO Data Recovery.

When you switch to the virtual server, you can backup your data by creating images of every individual drive. But when you reboot the system after restoring data on the VM (Virtual Machine) hard drives; you may encounter the following error message:

“Not a directory

Boot not found

Cannot open

Stage 1 boot failure: error loading hd(40)/boot”

When you attempt to get past the boot process using boot/root disks, the process halts before INIT SINGLE USER MODE with the following error message:

“PANIC: exit - cannot exec /etc/init (PID 1) 0×00000200”

If you attempt to access data by putting the old hard drives in slot, the array gets crashed and displays the underwritten error on screen:

“No array configuration”

This entire behavior of SCO OpenServer makes your system inaccessible and SCO OpenServer Data Recovery comes into the picture to revive your critical server data.

Grounds of the issue

This problem may occur when you image the drive for transferring data to the Virtual Machine. The reason behind the issue is you have actually imaged the partition instead of the drive. Thus, the boot information goes missing from your drive and the system becomes unbootable.

Resolution

To sort out this problem, you need to format the primary volume of your hard drive and reinstall SCO OpenServer operating system. Formatting the hard drive will write new boot information on it and then you will be able to boot your system.

Although, formatting the drive is able to resolve boot level problems but it also has a downside. It removes all data from the hard drive and causes serious data loss issues. In such situations, carrying out SCO OpenServer Recovery is the only option to fix this problem.

It is best possible using third party applications which are known as SCO Data Recovery software. These software work in almost all data loss situations and perform absolute recovery by thoroughly scanning the drive.

Stellar Phoenix (SCO OpenServer) Data Recovery is the most powerful tool for SCO OpenServer Recovery. The software retrieves all missing or inaccessible data. It supports recovery from HTFS and EAFS file system volumes. The software gets installed on Windows (Windows XP, 2003, 2000, NT, ME and 98) and the UNIX hard should be connected as slave.